Lawn Mower

lawn mower

lawn mowers


Anyone who grew up with a lawn would definitely remember
about the mowing it during weekends. It had been an uneventful and tiring task, but somebody had to try to do it.

But just imagine cutting the grass without a lawn mower. The task would be even harder. So whether you wish it or not, lawn mowers are made for a reason, and it’s an honest reason at that.

More than just that, these machines help cut grass on lawns quickly and evenly. This is often because of the revolving blades under its hood.

These blades could also be operated manual (i.e. pushing the lawn mower) or by employing a motor (electric or an
internal combustion engine).

They also are available in different shapes and sizes. Usually, smaller and simpler ones are meant for little lawns of households. On the opposite hand, larger and more powerful ones are utilized in larger areas like tennis courts and even stadiums.

Sure enough, lawn mowers do an excellent job at making t life
easier when it involves cutting grass. But they aren’t used only for that purpose. They are used even for a hobby or recreation.

History Of Lawn mowers

Lawn mowers are around for an extended time already and
they have changed from being a manually powered machine into
fuel or electric-powered varieties.

However, despite these changes, their primary purpose has remained practically an equivalent, that is, to chop grass
and to try to to it evenly.

While most of the lawn garden mowers produced during the 19th century were muscle-powered, manufacturers looked into
other power sources like horses and steam.

However, the invention of fuel-powered motors gave rise to
motorized lawn mowers sometime within the mid to late 19th
century to the first a part of the 20th century.

Finally, there are robotic mowers. Although they still
need a touch help from humans so as to work, much of
their work is automated which saves people tons of your time.


Find The Best Lawn Mower

lawn mower income generator

best mower

A lawn mower – or lawnmower is a machine utilizing one or more revolving blades to cut a grass surface to an even height.
How to find the best mower for you!

Small mowers
– no propulsion (requires human power to move over a surface).
– “walk-behind” mowers are self-propelled (requires a human only to walk behind and guide them).

Large mowers
-self-propelled “walk-behind” types
-“ride-on” mowers (the operator can ride on the mower and control it from there).It is like a mini-tractor.

lawn mower

Sure,non-powered push mowers, are suitable for small residential lawns and gardens.
Ride-on mowers, which are larger than push mowers and are suitable for large lawns.

Cutting Mechanism:

Cylinder or reel mower
This method consists of a single horizontal axis. Over this is a fast-spinning reel of blades that force the grass past the cutting bar. Of all the mowers, a properly adjusted cylinder mower makes the cleanest cut of the grass.

There are many variants of the cylinder. A gasoline engine or electric motor can be added to a cylinder mower to power the cylinder, the wheels, the roller, or any combination of these.

Rotary Mowers
This method uses a vertical axis with the blade spinning at high speed relying on impact to cut the grass. Engine motor may be powered by gasoline or electricity.

Source of Energy


Most rotary push mowers are powered by internal combustion engines. Usually, are four or two-stroke engines.

Lawn mowers normally have only one cylinder. Gasoline mowers have the advantages over electric mowers of greater power and distance range of action.

Disadvantages may be the pollution and necessity of spark plug maintenance, periodically cleaning air filter or engine oil changing.


Electric mowers are further subdivided into corded and cordless electric models. Both produce less noise.
Corded electric mowers are limited in range by their trailing power cord.

Cordless electric mowers are powered by a variable number of batteries. Batteries can be in the interior of the lawn mower or on the outside. More batteries seem more power and more work time.

Here is not pollution, no noise, no need engine maintenance.

Using Lawn Mower To Mow Properly

using lawn mower

using lawn mower

How to Properly Mow the Lawn

Mowing one’s lawn has somewhat become an art of sorts.

While others may prefer to simply mow their way along the grass and disrespect what happens, properly mowing the lawn is vital especially keep the grass and therefore the ground healthy.

Want some recommendations on the way to do that? Well here are a number of them.

Before mowing your lawn, remove rocks and sticks which will get within the way. Doing this prevents the materials from getting hurled by the mower.

Keep your lawn healthy by not cutting the grass too
short. Generally, leave half of an inch of grass sticking out of the ground.

If you discover the activity of mowing your lawn as
something therapeutic, try to not be overeager about it.

You actually don’t need to cut the grass every week; just cut it when the grass begins to seem too unkempt. Offer your grass time to grow and they surely will grow healthy.

Don’t throw the cut grass away. While it’s going to seem that it helps keep your lawn looking neat and tidy, you ought to keep it on top of the grass.

Once the cut grass decomposes, it’ll act as mulch or fertilizer for your lawn.

Finally, attempt to keep your mowing pattern as varied as possible whenever you are doing this activity. It keeps the growth of your grass straight.

Using Lawn mower Safely

A lawn mower is fitted with sharp blades so as to chop grass cleanly and evenly. And since there are sharp objects involved, safety concerns accompany using this machine.
Here are some recommendations on how you’ll use your lawn mower safely.

– mowers, the motorized types especially, can hurl
debris like rocks with tremendous force. That’s why people should steer beyond it when it’s operational.

– there are other injuries caused by touching hot surfaces of the lawnmower. People should, therefore, avoid coming into contact with a mower’s surface when it’s getting used or right after it’s been put into use.

– believe it or not, people also are injured by their
mowers once they tried to service the mower without turning the machine off. This isn’t only irresponsible, this is often plainly stupid.

– as mentioned earlier, the blades of mowers are extremely sharp so people should take care when handling them or replacing them.

– running a mower over feet and hands is another explanation for lawn mower-related injuries. People operating this machine must avoid mowing where there are people or a minimum of telling the people to maneuver away while gardeners do their job.


Lawn Mower Repair And Maintenance

lawn mower repair income generator

lawn mower repair

Repair And Maintain Your Lawn mower Properly

Lawn mowers are machines that are meant to last. Even the most cost-effective brands can last up to 10 years while costlier ones can last twice the maximum amount.
However, owners got to maintain them well so as to stay the mowers running smoothly for an extended time. Below are some recommendations on how you’ll look out of and maintain your mower.

1. Keep your blades sharp – sharp blades in lawn mowers are a gardener’s delight. Not only do they cut the grass cleanly, but they also keep the grass healthy due to the clean-cut. Blades typically become dull after a month or two of normal use. they ought to, therefore, be taken out of the mower (making sure that it’s turned off before doing anything) and filed to form them sharp again.

2. Replace or clean your air cleaner – motorized mowers are usually equipped with air filters.
In time, they get clogged then they ought to get replaced or cleaned counting on the fabric they’re made from. Generally, paper filters are meant to be thrown away while those made from foam should simply be cleaned.

3. Remember to check the spark plug(s) for corrosion and wear. Don’t attempt to clean the spark plug if it is showing some wear. It is cheap and easy to replace the spark plug. Be sure to remove any debris before removing the spark plug and by using a bit of anti-seize compound when you replace the old spark plug, you will ensure easier removal next year. Clean and lubricate the throttle linkages and the choke, and apply grease to the mower deck and all the fittings.

4. Use the proper quite oil – oil is required by motorized mowers to stay the engine lubricated.  The oil in your lawn mower lubricates the engine. Be sure you read the operating instructions on the type and amount of oil your mower uses. The proper quite gasoline should be bought to avoid destroying the engine.

5. Keep the tires well-inflated – well-inflated tires keep mowers running evenly, especially within the case of the ride-on variety. The tire pressure should therefore, be checked whenever before operating the mower.

6. Clean the battery terminals and replace your old lawn mower battery if necessary.

When mowing season is over, there are certain steps to properly store your lawn mower for the winter. It is advisable to remove the oil and gas, and clean the exterior.   

Find The Best Garden Irrigation System

find irrigation


You have one bigger or less big field with plants or grass.  At one time, this soil may want some water to fight with the sun. The solution is at the cloud with the rains, but also, you could try the irrigation system anytime.


Thus, for the smaller ground is good to choose a lawn sprinkler device or hose-end sprinkler system. A lawn sprinkler system can be permanently installed, as opposed to a hose-end


sprinkler, which is portable.

Sprinkler Under Ground systems are installed in residential lawns, in commercial landscapes, for churches and schools, in parks and golf lawns. These hose-end sprinklers can have various types of water-distribution functionality, such as oscillating, sweeping, pulsating, and arm whirling.

Sprinkler In-Ground systems, where watering heads are connected to an underground pipe system.
This type of system is highly automated – you’ll set up watering zones and schedule every to induce a specific quantity of water at a specific time. Variety of kinds of mechanical device heads are on the market for these mechanical device systems, permitting you to customize the water distribution counting on the sort of plants that are growing close to every head.


This is usually a really reasonable variety of watering systems. Generally, made from recycled tires, soaker hoses are riddled with little holes from that water seeps.You just hook them up to your spigot or to a leader hose that’s connected to the tap and switch on the water. Water drips along the entire length of the hose, meaning as it winds around your garden, even places where you don’t have plants. This is a potential downside.


Similar to a soaker hose, drip emitters contain an intact hose from that drip emitters (tubes with holes) extend. This enables for additional precise placement of the watering lengths. There are many different types of drip equipment, including drippers, bubblers, soakers (inline emitters), and micro-sprayers.

Read more

Drip Irrigation System & Parts

drip irrigation

Drip irrigation is known for being a very efficient method of watering plants. This form of irrigation applies water directly and slowly to the soil. Drip irrigation places small drip emitters in close proximity to the crops’ root. This provides a much-improved efficiency and makes the system much more controllable.

When you install a drip irrigation system, you can choose one of two varieties: above ground and below ground.

Above ground version drips
small amounts of water continuously onto the ground and allow it to soak in. It is all regulated from a pressure controller, which ensures that the water just comes out at a drip instead of a spray or a stream. These pressure regulators are very inexpensive. The whole drip system can be set up with a pressure regulator and a garden hose with holes poked in it.

The underground system is a bit more of a pain to install and maintain.
But if you’re really into the aesthetic aspect of your garden and don’t want any visible watering system, then you might consider it worth it.
It’s essentially the same as the above ground version, only a small trench is dug for the hose or pipe prior to any planting. This allows the water direct access to the roots for the most watering efficiency. Plus, you can impress your neighbors by having a beautiful garden without ever going outside to water it! They’ll be baffled.

These emitters are directly connected to the water source by feeder hoses. Another setup is to have the emitters built into the feeder hose instead of rows of independent emitters. This is a trickle hose system.

These systems consist of several constituent parts.

Valve-turn the water flow on or off.
Backflow preventer- reduce the pressure of water flowing through the system and keep it at a constant level.
Filters- used to filter the water.
Emitters – directly control the rate of water.

drip irrigation

Are usually small plastic devices that either screw or snap onto the drip tube or pipe.

This irrigation system is best used for lawn and gardens.  It is easy to install, easy to design, can be very inexpensive.  It can reduce disease problems associated with high levels of moisture on some plants. Soil moisture thereby enhancing production. Irrigation can be carried out day and night and water is supplied where and when required.

One of the main advantages of the drip irrigation system is its
efficiency. Instead of spraying large amounts of water willy-nilly like a hose does, it makes the most of your precious water by putting it exactly where it is needed. It can also provide your garden with constant watering, instead of just having to go thirsty whenever you’re not around to water it.




Soaker Hose Irrigation System & Parts

soaker hose


If you have a garden, soaker hoses are a great, efficient solution to irrigate plants without wasting water.

The hose permits water to slowly run out through small pores on the complete length of the rubber hose at a flow rate at the ground. The plants will absorb providing the right wet content. The water goes right to the basis zone with very low pressure. A soaker hose is build to work at low water pressure. Choosing the right pore size is important. You want to have a product that can keep the soil moist enough.

Hoses with enlarged holes may produce too much water.
Generally, soaker hoses should produce thick beads of water.

So, if turn the water faucet on too high, over time, water becomes shooting streams.

For this reason, soaker hoses must have an internal plastic regulator.

On the other hand, porous soaker hose watering irrigation is created to permit water to run or to leak water right along the length of the hose. You can wrap the hose twice around plants that need more water.

This simple system works best in vegetable garden beds.
For soaker hoses to perform optimally they would have the most length of 100 feet. Use a garden hose to attach the hose to the tap.